Konica Minolta bizhub 601 User Manual page 482

Authentication Unit (Biometric Type AU-101)
– If the plug-in version appears as "4.x": This software can be used.
Setup
1
Turn off the machine with the main power switch, and then disconnect the authentication unit from the
machine.
2
Install BioDriver (USB-Driver).
– Plug the cable from the authentication unit into the USB port on the computer.
– The Found New Hardware Wizard starts.
3
Select "Yes, now and every time I connect a device", and then click [Next].
4
Insert the application CD-ROM included with the authentication unit into the CD-ROM drive of the
computer.
751/601
12
12-7