Application functions
–
To cancel the "Setting", touch [No].
4
Check the original size, and then touch [OK].
–
If the original size cannot be detected automatically or to specify the original size, touch [Original
Size], and then specify the original size from any of the screens.
–
Touch [↑] or [↓] to display a different list of standard sizes.
–
To specify a custom size, touch [Custom Size] to display the Custom Size screen. Touch [X] or [Y]
to select the dimension, and use the keypad to specify the desired value. (To enter a value, press
the [C] (clear) key, and then use the keypad to type in the new value.)
–
If a value outside the allowable range is specified, the message "Input Error" appears. If "Input Error"
appeared or if the value was incorrectly entered, press the [C] (clear) key, and then specify the
correct value.
5
Specify any other desired copy settings.
–
To cancel the setting and select the default, press the [Reset] key.
6
Using the keypad, type in the desired number of copies.
751/601
7
7-40