Specifying User Settings; System Setting - Konica Minolta bizhub C352 User Manual

Utility
12.3

Specifying user settings

This section describes the main parameters and operations that can be per-
formed after pressing the [Utility/Counter] key, then touching [2 User Set-
ting].

System setting

Language Selection
Description
Select the language of the Touch Panel messages.
Measurement Unit Setting
Description
Select one of the following as the measurement units in which values
are displayed in the touch panel.
mm (Numerical Value), inch (Numerical Value), inch (Fraction)
Paper Tray Setting
Parameter
Auto Tray Select Setting
Auto Tray Switch ON/
OFF
No Matching Paper in
Tray Setting
Print Lists
C352
Description
Select the paper trays that are selected
automatically when the Auto Paper Se-
lect setting is performed. In addition,
specify the priority of the paper trays
when the ATS feature is performed.
Select whether or not a paper tray load-
ed with paper of the same size is select-
ed automatically when a paper tray
becomes empty while printing copies.
Select the operation that is performed
when there is no paper of the corre-
sponding size in the specified paper tray.
• Stop Printing (Tray Fixed):
The machine stops operating.
• Switch Trays (Tray Priority):
Whether or not the specified paper
tray contains paper of the corre-
sponding size is determined and, if it
does not, a different paper tray is se-
lected if it contains paper of the corre-
sponding size.
Select the paper tray used for printing
lists, such as the sales counter and con-
sumables indicators.
12
Default Setting
English
Default Setting
mm (Numerical Value)
Default Setting
Tray 2 → Tray 3 → Tray 4
→ Tray 1
Restrict
Stop Printing (Tray
Fixed)
Tray 1
12-17