Printing A Proof Copy Of A Stored Job - Konica Minolta bizhub 601 User Manual

Managing jobs
10.2.6

Printing a proof copy of a stored job

A single copy of a stored job can be printed in order to be checked.
The Held Jobs list contains jobs such as those for which a proof copy was being printed when the automatic
system reset operation was performed.
Note
For details on displaying the screen, refer to
jobs)" on page
1
In the Current Jobs list of the Print tab, touch [Release Held Job].
The Release Held Job screen appears.
2
From the job list, select the job whose proof copy is to be printed, and then touch [Proof Copy] key.
– If the job to be removed from the Held Jobs list is not displayed, touch [↑] or [↓] until the desired job
is displayed.
– If an incorrect job was selected, touch the button for the selected job again to deselect it.
– After the single proof copy is printed, check the print result.
? How is printing of a proof copy stopped?
% Press the [Stop] key.
!
Detail
To change the settings, touch [Check Job Set.] in the Release Held Job screen. For details, refer to
"Printing a stored job" on page
751/601
10-9.
10-12.
"Displaying the Current Jobs list (stored jobs and active
10
10-11