Specifying User Settings; System Settings - Konica Minolta bizhub C550 User Manual

Hide thumbs Also See for bizhub C550:
Table of Contents

Advertisement

Utility mode
11.3

Specifying user settings

This section describes the function and main registration parameters that
can be specified after pressing the [Utility/Counter] key, then touching [User
Settings].

System Settings

Language Selection
Description
Select the language of the Touch panel messages.
Measurement Unit Settings
Description
Select one of the following as the measurement units in which values are
displayed in the touch panel.
mm (Numerical Value), inch (Numerical Value), inch (Fraction)
Paper Tray Settings
Parameter
Auto Tray Selection
Settings
Auto Tray Switch
ON/OFF
No Matching Paper
in Tray Setting
Print Lists
Cover Sheet Feed-
er Setting
C550
Description
Select the paper trays that are selected automatical-
ly when the "Auto" Paper setting is specified. In ad-
dition, specify the priority of the paper trays when
the auto tray switch operation is performed.
Select whether or not a paper tray loaded with paper
of the same size is selected automatically when a
paper tray that was selected manually becomes
empty while printing copies.
Select the operation that is performed when there is
no paper of the corresponding size in the specified
paper tray.
• Stop Printing (Tray Fixed):
The machine stops operating.
• Switch Trays (Tray Priority):
Whether or not the specified paper tray contains
paper of the corresponding size is determined
and, if it does not, a different paper tray is
selected if it contains paper of the corresponding
size.
Select the paper tray used for printing lists, such as
the sales counter and consumables indicators.
Select the paper tray of the post inserter, paper type
and paper size. This parameter is available if the op-
tional post inserter has been installed.
11
Default Setting
English
Default Setting
mm (Numerical Value)
Default Setting
Tray priority order:
Tray 1 → Tray 2 → Tray
3 → Tray 4 → LCT*
*Appears only when
the LCT is installed.
Restrict
Stop Printing (Tray
Fixed)
Tray1, 1-Sided
F1, Plain Paper, Auto
Detect
11-20

Advertisement

Table of Contents
loading

Table of Contents