Konica Minolta bizhub 601 User Manual page 437

Utility mode
!
Detail
For details on the "Center Staple & Fold" setting, refer to
Staple & Fold" setting)" on page
0 Before making any adjustments, use the "Half-Fold" setting to print a single sample copy. Perform the
adjustment while checking the sample that was created.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
Settings screen" on page
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [2 Half-Fold Position].
The Half-Fold Position screen appears.
6
Touch the button for the paper size to be adjusted.
– If the paper size to be adjusted is not displayed, touch [↑] and [↓] until the desired paper size is
displayed.
7
Compare the width of the left pages of the copy sample with the width of the right pages to check for
the center of the paper.
– If the folding position is too far to the left of the center of the paper, touch [+] to increase the
adjustment (between 0.1 mm and 12.7 mm).
– Each time [+] or [-] is touched, the value is increased or decreased by one increment.
751/601
2-67.
11-36.
"Binding copies at the center ("Center
"Displaying the Administrator
11
11-41