Additional copy operations
3.3
Interrupting a copy job (Interrupt mode)
The current jobs can be temporarily interrupted so an original can be copied with different copy settings.
This is convenient for quickly making a copy.
!
Detail
For details on making a copy after printing of the current job is finished, refer to
priority" on page
1
Position the original to be copied.
–
For details on loading the original, refer to
2
Press the [Interrupt] key.
–
If a job is being printed, the message "The job is
stopping." appears.
The indicator on the [Interrupt] key lights up in green and
printing of the current job stops.
What settings are selected when the [Interrupt] key is
?
pressed?
% When the [Interrupt] key is pressed, all functions and
settings are reset to their defaults.
Why is the [Interrupt] key not available?
?
% The [Interrupt] key cannot be pressed while an
original is being scanned.
3
Select the desired copy settings.
4
Press the [Start] key.
Printing for the interrupting job begins.
5
After the interrupting job has finished printing, press the [Interrupt] key.
The indicator on the [Interrupt] key goes off.
The copy settings return to those specified before printing was interrupted.
Note
If the interrupting job is cancelled, printing for the interrupted job automatically restarts.
751/601
10-14.
"Loading the original into the ADF" on page
3
"Increasing printing
2-6.
3-7