Konica Minolta bizhub 601 User Manual page 515

Authentication Unit (IC Card Type AU-201)
13
Click [Export to the device].
– To change the registered data, select the user name, and then click [Edit].
14
Click [Write].
– Data Administrator is equipped with a batch copy feature that allows the registered user data to be
specified on the multiple machines specified to be used with the authentication unit.
The registered user data is specified on the machine.
15
Click [OK].
16
Disconnect the authentication unit from this USB port of the computer.
17
Turn off the machine with the main power switch, connect the authentication unit, and then turn on the
machine with the main power switch.
– When the this machine is turned off, then on again with the main power switch, wait at least 10
seconds to turn the machine on after turning it off. The machine may not operate correctly if it is
turned on immediately after being turned off.
– Hold the plug when plugging and unplugging the USB cable, otherwise the cable may be damaged.
751/601
13
13-15