Specifying User Authentication Settings - Konica Minolta bizhub C250 User Manual

Setting Up the PCL Driver

Specifying User Authentication Settings

If user authentication settings have been specified on this machine, you must
enter a user name and password.
If a print job is sent using a user name or password that is not a registered
account on this machine or if a job is sent without the "User Authentication"
check box selected, the job is deleted without being authenticated by this
machine.
When the user authentication settings are specified on this machine, the au-
thentication operation restriction function is in mode 2, and the authentica-
tion information is not entered correctly, the applicable user is locked and
cannot be accessed.
1
Click the Setup tab.
2
Click the [User Authentication/Account Track] button.
3
Select the "User Authentication" check box, and then enter the user
name and password.
4
Click the [OK] button.
C250
5
5-16