Utility mode
The Account Name screen appears.
7
Type in the account name (up to 8 characters long), and then touch [OK].
–
For details on typing in text, refer to
–
If [Name] was displayed, type in the account name (up to 20 characters), and then touch [OK].
–
If "Account Track Input Method" was set to "Account Name & Password", the same account name
cannot be registered more than once.
The account name is set.
8
Touch [Password].
–
If "Account Track Input Method" was set to "Password Only", the same password cannot be
registered more than once.
The Password screen appears.
9
Type in the password (up to 8 characters long), and then touch [OK].
A screen for retyping the password appears.
10
Retype the password specified in step 9, and then touch [OK].
The user password is set.
11
Touch [Max. Allowance Set].
The Max. Allowance Set screen appears.
12
To specify the maximum number of prints allowed, use the keypad to type in the desired value.
–
To specify no maximum for color and black prints, touch [No Limit].
–
Touch [All Accounts] to apply the settings in the current screen to all registered accounts. Touch [All
Accounts], touch [OK], and then touch [OK] in the next screen that appears in order to display a
message and apply the settings to all accounts. At this time, do not turn off the machine with the
main power switch.
13
Touch [OK].
751/601
"Entering text" on page
14-2.
11
11-73