Scanning A Multi-Page Original From The Original Glass - Konica Minolta bizhub 601 User Manual

Basic copy operations
– If the "Separate Scan Output Method" parameter is set to "Batch Print", the copy settings can be
changed. To change the copy settings, touch [Change Setting], and then touch [OK] after changing
the settings as desired.
2.3.4

Scanning a multi-page original from the original glass

When making double-sided or combined copies using the original glass, place each page of a multi-page
original on the original glass to scan it. The following procedure describes how to place single-sided original
pages on the original glass to make double-sided copies.
0 The output method used with the "Separate Scan" setting can be set to "Page Print" or "Batch Print".
As a default, "Page Print" is selected.
0 For details on the output method used with the "Separate Scan" setting, refer to
page 11-18.
1
Lift open the ADF.
2
Position the first page or the first side of the original face down onto the original glass.
– For details on positioning the original, refer to
page
3
Close the ADF.
751/601
2-7.
"Placing the original on the original glass" on
2
"Copier Settings" on
2-11