Main Drive Gear Assembly Removal - Lexmark C540n Service Manual

Main drive gear assembly removal

See
"Main drive gear assembly, with motors" on page 7-5
1. Remove the left cover. See
Remove the LVPS shield. See
2.
shield.
Remove the screws (A) on the top cover.
3.
Disconnect the cable from the fuser exit sensor.
4.
Unplug the cables from the motors (C), and remove all cables from the retainer (D).
5.
Note: Observe the cable routing for reinstallation.
"Left cover assembly removal" on page
"Left lower frame" on page 4-53
5025-2xx, 4xx
for the part number.
4-6.
for instructions on removing the LVPS
Repair information
Previous
Next
Go Back
4-63