Adjust The Amount Of Light Emitted By The Flash ([ Flash] (Brightness Adjustment)); Photograph The Same Image With Different Exposure ([ Bracketing]) - FujiFilm FINEPIX s1000fd Owner's Manual

Adjust the amount of light
emitted by the flash
([ FLASH] (Brightness
Adjustment))
Available Shooting modes: N, M, <, >
Use this setting to change the amount of light emitted by
the flash to suit the photography conditions or to achieve
a desired effect.
SHOOTING MENU SHOOTING MENU
CAUTION
• Depending on the type of subject and the shooting
distance, brightness adjustment may have no effect.
• The image may appear dark when setting the shutter
speed to higher than 1/1000 sec.
Downloaded From camera-usermanual.com Fujifilm Manuals
FLASH FLASH
2 /
+ 3
BRACKETING BRACKETING AUTO AUTO
1 /
+ 3
SET - - UP UP SET
+ 0
-
1 /
- 3
2 /
- 3
0
Photograph the same image with
different exposure
([ BRACKETING])
Available Shooting modes: N, M, <, >
Use this setting to photograph the same image with
different exposure settings. Bracketing shoots 3
continuous frames, one of which is correctly exposed
while the remaining two are underexposed and
overexposed respectively by a set amount.
SHOOTING MENU SHOOTING MENU
FLASH FLASH
BRACKETING BRACKETING
SET - - UP UP SET
Setting the menu (➝p.74)
0
1 /
+ EV EV
3
-
2 /
+ EV EV
3
-
1 EV EV
+
-
87