Compressor Control Valve Assembly Removal (V5 - Conventional Mount); Compressor Control Valve Assembly Removal (V7 - Direct Mount) - GMC chevrolet camaro 2000 Service Manual

1-42 Heating, Ventilation and Air Conditioning HVAC
J
8433-3
157234
237069
157595
6. Mark the clutch coil terminal location (2) on the
compressor front head.
7. Install the J 33025 onto the J 8433.
8. Install the J 8433 onto the compressor clutch
coil (1) and tighten the puller leg bolts.
9. Tighten the center forcing screw J 8433-3 of 1he
compressor pulley puller J 8433 against the
J 33023-A
to remove the compressor clutch coil
from the compressor.
10.
Remove the
J 8433-3,
the
J 33023-A,
the J 33025
and the J 8433.
Compressor Control Valve Assembly
Removal (VS - Conventional Mount)
Tools Required
• J 5403 Snap Ring Pliers
" J 39500-8 A/C Refrigerant Recovery, Recycling
and Recharging (ACR4) System
1. Recover the refrigerant using the J 39500-B.
2. Remove the control valve retaining ring using
the J 5403.
3. Remove the control valve assembly (5).
Compressor Control Valve Assembly
Removal (V7 - Direct Mount)
Tools Required
J 41790 Compressor Holding Fixture
1. Remove the compressor from the vehicle.
2. Clamp the compressor holding fixture, J 41790 in
a vise and attach the compressor to the J 41790.
(
(