GMC chevrolet camaro 2000 Service Manual page 337

2-90 Steering Wheel and Column - Tilt
343889
306318
3
569763
Steering
4. Remove the steering shaft assembly from the
steering column.
Important: Mark the race and upper shaft assembly
and the lower shaft assembly before disassembly.
Failure to assemble the race and upper shaft assembly
and the lower shaft assembly correctly will cause ·
the steering wheel to be turned 180 degrees.
5. Tilt the race and upper shaft assembly (1)
90 degrees from the lower steering shaft
assembly (2) to disengage. (
6. Separate the race and upper shaft assembly (1)
from the lower steering shaft assembly (2).
7. Remove the ignition switch assembly. Refer to
Ignition Switch Assembly - Disassemble - Off
Vehicle
8. Remove the 4 hexagon washer head tapping
screws (3).
9. Remove the steering column housing support
assembly (2) from the steering column housihg
shro.ud (1 ).