)
Driveline/Axle
Decrease the backlash in order to move the differential
drive pinion gear closer to the centerline of the
differential ring gear. This will cause the following
tooth contact pattern:
• High heel (2) contact on the drive side (4) moves
down and toward the toe (1).
• High toe (1) contact on the coast side (3) moves
down and toward the heel (2).
The following tooth contact pattern exists when the
differential drive pinion gear is too close to the
centerline of the differential ring gear:
• Low toe (1) contact on the drive side (4)
• Low heel (2) contact on the coast side (3)
Increase the backlash in order to move the differential
drive pinion gear further away from the centerline of
the differential ring gear. This will cause the following
tooth contact pattern to exist:
• Low toe contact on the drive side (4) moves up
and toward the heel (2).
· ·
• Low heel contact on the coast side (3) moves up
and toward the toe (1 ).
Rear Drive Axle 4-51
4
3
7566
1
4
3
7579
4
3
7566