GMC chevrolet camaro 2000 Service Manual page 163

1.;.55
Heating, Ventilation and Air Conditioning
HVAC
569444
365450
365450
7. Remove the NC compressor and condenser
hose bolt.
8. Discard the 0-ring.
9. Remove the NC compressor and condenser hose
nut at the condenser.
10. Discard the 0-ring.
11. Lower the vehicle.
12. Remove the NC compressor arid condenser hose
from the vehicle.
Installation Procedure
Lightly coat the 0-rings with a mineral · ·
base 525 viscosity refrigerant oil.
1. Install the A/C compressor and condenser hose to
the vehicle.
2. Raise and suitably support the vehicle. Referto
Lifting and Jacking the Vehicle in General
Information.
3. Install a new 0-ring.
Notice: Refer to Fastener Notice in Cautions and
Notices.
4. Install the
NC
compressor and condenser hose
nut at the condenser.
(
(
Tighten (
Tighten the
NC
compressor and condenser hose
nut at the condenser to 16 N-m (12 lb ft).