Table of Contents
Advertisement
HVAC
Compressor Replacement (3.8 l)
) Removal Procedure
)
Important: Compressor related noise is generally air
conditioning (A/C) system related and not always
caused by the compressor itself. Prior to replacing
compressor, refer to Noise Diagnosis - A/C System.
1. Recover the refrigerant. Refer to Refrigerant
Recovery and Recharging.
2. Remove the serpentine drive belt. Refer to Drive
Belt Replacement in Engine Mechanical - 3.8 L.
3. Disconnect the electrical connector at the air
conditioning (A/C) compressor.
4. Remove the negative battery cable nut from the
engine block stud.
5. Remove the negative battery cable from the stud.
6. Raise and support the vehicle. Refer to Lifting
and Jacking the Vehicle in General Information.
7. Remove the A/C compressor and condenser
hose bolt.
8. Discard the 0-ring.
Heating, Ventilation and Air Conditioning
1.;29
',..__---,
G'(_'---
365420
43679
569444
Advertisement
Chapters
Table of Contents
