GMC chevrolet camaro 2000 Service Manual page 164

HVAC
Heating, Ventilation and Air Conditioning 1-67
5. Install a new 0-ring.
6. Install the A/C compressor and condenser
hose bolt.
Tighten
Tighten the A/C compressor and condenser hose
bolt to 33 N-m (24 lb ft).
7. Lower the vehicle.
8. Install the negative battery cabl.e to the stud.
9. Install the negative battery cable nut to the engine
block stud.
Tighten
Tighten the negative battery cable nut to the
engine block stud to 25 N·m (18 lb ft).
10. Install a new 0-ring.
11. Install the A/C compressor and condenser hose
bolt at the accumulator.
Tighten
Tighten the A/C compressor and condenser hose
bolt at the accumulator to 16 N-m (12 lb ft).
12. Recharge the A/C system. Refer to Refrigerant
Recovery and Recharging.
13. Perform a leak test on the A/C system. Refer to
Leak Testing.
569444
43679
282936