Wheel Speed Sensor Jumper Harness Replacement (Front Left); Wheel Speed Sensor Jumper Harness Replacement (Rear With Out Traction Control) - GMC chevrolet camaro 2000 Service Manual

5-244 Antilock Brake System
213395
213395
2
213402
Brakes
Wheel Speed Sensor Jumper Harness
Replacement (Front left)
Removal Procedure
1. Remove the wheel speed sensor connector.
2. Remove the jumper harness from the
retaining clip.
3. Remove the grommet retainer at the inner fender.
4. Remove the transmission cable retainer and
various harnesses from restraints at left strut
tower to access jumper harness connector.
5. Remove the upper jumper harness connector.
6. Pull the grommet through inner fender pass-thru
and remove jumper harness.
Installation Procedure
1. Route the new jumper harness through inner
fender pass-thru.
2. Install the upper jumper harness connector.
3. Install the transmission cable retainer and various
harnesses to restraints that may have been
disconnected to access jumper harness.
4. Install the grommet retainer at the inner fender.
5. Install the jumper harness from the retaining clip.
6. Install the wheel speed sensor connector.
Wheel Speed Sensor Jumper Harness
Replacement (Rear with out Traction
Control)
Removal Procedure
1. Remove the wheel speed sensor connector.
2. Remove the rear wheel speed sensor jumper
harness grommet from retainer (1 ).
3. Remove the upper harness connector from rear
body pass-thru connector.
(
(