Table of Contents
Advertisement
LIGHTING
LAMP CONTROLS
Rotate the knob to activate the exterior
lamps.
Off/On
AUTO
Automatically activates the exterior lamps,
depending on outside lighting conditions.
Parking Lamps
Headlamps
Fog Lamps
F
Press to turn the fog lamps on/off.
Instrument Panel Brightness
Press and hold the +/– buttons to adjust
the instrument panel lighting.
Task Lighting
Press to turn the forward-facing outside
mirror lamps on/off.
Cargo Lamp
F
With the vehicle in Park, Reverse or
Neutral, press to turn the cargo bed/hitch
lamps and/or rear-facing mirror lamps
on/off. The button indicator illuminates
when the cargo bed lamps are on.
ADAPTIVE CRUISE CONTROL
The system enhances regular Cruise
Control to maintain a driver-selected
following gap — the time between your
vehicle and a vehicle detected directly
ahead — by accelerating or braking auto-
matically while you continue to steer.
Press and hold the
switch between regular
Control and
Use the RES+ and SET- controls to set/adjust Cruise Control or Adaptive Cruise Control.
With Adaptive Cruise Control active, press and release the
to select a targeted gap setting of Far, Medium or Near.
Note: Refer to the Getting to Know Super Cruise guide for information on Super Cruise F
functionality.
12
Optional equipment
F
F
Cancel button to
Cruise
Adaptive Cruise Control.
INTELLIBEAM SYSTEM
The IntelliBeam system automatically
turns the high-beam headlamps on/
off based on traffic conditions at night
when the lamp control is in the AUTO or
position and the system is activated,
indicated by a green
ment cluster. A blue
the high-beam headlamps are on.
To turn the IntelliBeam system on or
off, press the
the turn-signal lever with the lamp
control in the AUTO or
Note: IntelliBeam activates the high-beam
F
headlamps only when driving more than 25
mph. The fog lamps must be off.
F
See Driving and Operating in your Owner's Manual.
Some equipment shown may not be included in your vehicle.
on the instru-
appears when
button on the end of
See Lighting in your Owner's Manual.
Following Gap button
position.
Advertisement
Table of Contents
