Table of Contents
Advertisement
2-88 Steering Wheel and Column - Tilt
343835
343861
1
2
343866
Steering
5. Remove the switch actuator pivot pin (2).
6. Remove the pivot and pulse switch assembly (1)
from the lock housing cover assembly.
Lock Housing Assembly - Assemble· -
Off Vehicle
Assembly Procedure
1. Lubricate the switch actuator pivot pin (2) with
synthetic grease.
2. Install the switch actuator pivot pin (2) to the pivot
and pulse dimmer switch assembly (1 ).
3. Install the pivot and pulse assembly (1) into the
lock housing cover assembly.
4. Lubricate the dimmer switch rod actuator (3) with
lithium grease.
5. Install the dimmer switch rod actuator (3) to the
column housing cover end base plate (2).
6. Install the column housing cover end base
plate (2) to the lock housing cover and sleeve
assembly (1 ).
Important: The bottom edge of the dimmer switch rod
actuator must rest on the bend of the dimmer
switch rod.
7. Align the lock housing cover and sleeve
assembly (1) onto the steering column.
(
(
Advertisement
Chapters
Table of Contents
