Drive Pinion Assemble - GMC chevrolet camaro 2000 Service Manual

4-34 Rear Drive Axle
164265
164270
J
8092
164257
DrivelineJAxle
Drive Pinion Assemble
ln.ner Bearing Installation Procedure
Tools Required
• J 8092 Driver Handle
• · J 29609 Rear Pinion Bearing Cup Installer
• J 5590 Rear Pinion Bearing Cone Installer
1. Use J 5590 in order
fo
install the inner drive
pinion gear bearing (1) onto the drive pinion
gear (2).
2. Use J 8092 and J 29609 in order to drive the
inner bearing race (1) into the rear axle housing,
if the inner drive pinion gear bearing was
replaced.
3. Install the new drive pinion gear bearing spacer
onto the drive pinion gear.
Outer Bearing Installation Procedure
Tools Required
• J 8092 Driver Handle
• J 7817. Front Pinion Bearing .Cup Installer
1. Use J 8092 and J 7817 in order to install the drive
pinion gear outer bearing race into the rear axle
housing if you remove the pinion gear outer
bearing race ..
2. Install the drive pinion gear outer bearing into the
rear axle housing. ·
3. Install the differential drive pinion gear seal.
(