5-94
Park Brake
1
2
214859
1
2
214859
64007
Backing Plate Replacement
Removal Proce.dure
Brakes
i. Unhook the rear cable eyelet (i) from the park
brake actuator lever (2).
2. Remove the parking brake shoe. Refer to Park
Brake Shoe Replacement.
3. Remove the parking brake actuator. Refer to Park
Brake Actuator Replacement.
4. Remove the brake backing plate bolts.
5. Remove the brake backing plate from the axle.
Installation Procedure
i. Install the brake backing plate to axle.
Notice: Refer to Fastener Notice in Cautions and
Notices.
2. Install the brake backing· plate ,bolts.
Tighten
Tighten the brake backing plate bolts to
58 N·m (43 lb ft).
3. Install the parking brake actuator. Refer to Park
Brake Actuator Replacement.
4. Install the parking brake shoe. Refer to Park
Brake Shoe Replacement.
5. Hook the rear cable eyelet
(i) onto the park brake
actuator lever (2).
Park
Brake
Actuator Replacement
Removal Procedure
;
.
Remove the parking brake shoe. Refer to Park
Brake Shoe.Replacement.
(
(