Track Bar Replacement - GMC chevrolet camaro 2000 Service Manual

)
)
Suspension
Installation Procedure
1. Position the spring upper insulator (3) to the top
of the coil spring (1).
2. Install the rear coil spring (1). Refer to Coil Spring
Replacement.
Track Bar Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle in General
Information.
2. Support the rear axle (2) with an adjustable
jack stand.
3. Remove the tie rod bolt ((3) and nut (8) from the
spring seat.
4. Remove the tie rod bracket brace bolts (7) from
the body brace bracket (1).
5. Remove the tie rod bolts (10) and nuts (9) from
the body brace and tie rod bracket (3).
6. Remove the tie rod (5).
7. Remove the tie rod bracket brace (4).
2000 - F Car (September 27, 1999)
Rear Suspension 3-57
181234
181235