GMC chevrolet camaro 2000 Service Manual page 183

1-86 Heating, Ventilation and Air Conditioning
HVAC
282931
282932
282934
Installation Procedure
1. Install the inlet and outlet hoses to the vehicle.
2. Install the inlet hose to the module retainer.
3. Install the inlet and outlet hoses to the heater core.
3.1. Apply lubricant to the inside diameter of the
heater hose, if necessary.
3.2.
Push the heater hose onto the fitting with a
twisting motion.
3.3. Squeeze the hose clamp ends together and
slide the clamp over the end of the
heater hose.
3.4. Install the clamp beyond the bead around
the fitting.
3.5. Install the. other heater hose.
Notice: Refer to Fastener Notice in Cautions and
Notices.
4. Install the bolt attaching the inlet and outlet hose
bracket at the mid rail.
Tighten
Tighten the heater hose bracket bolt to
14 N-m (10 lb ft).
5. Install the inlet ahd outlet heater hoses to the
water pump.
5.1. Apply lubricant to the inside diameter of the
heater hose, if necessary.
5.2. Push the heater hose onto the fitting with a
twisting motion.
5.3. Squeeze the hose clamp ends together and
slide the clamp over the end of the
heater hose.
5.4. Slide the hose clamp away from the water
pump fitting.
5.5. Install the clamp beyond the bead around
the fitting.
5.6. Install the other heater hose.
(
(