GMC chevrolet camaro 2000 Service Manual page 540

Brakes
5. Remove the brake caliper guide pin bolts and
) · discard.
)
)
6. Remove the rear brake caliper (3) from the inner
and outer pads (2) and mounting plate (1 ).
If the caliper is not being removed from the vehicle
for unit repair, suspend the caliper from the rear
suspension using a fabricated wire hook.
7. Remove the inner and outer brake pads (2) from
the mounting plate (1) if the following
conditions exist:
• The brake pads are also being replaced.
• The brake caliper mounting plate is also being
removed.
8. Inspect the caliper guide pins for free movement
in the caliper mounting plate.
9. Inspect the caliper guide pin boot for proper
seating in the retaining groove of the caliper guide
pin and the rear caliper mounting plate.
10. Replace the guide pins or guide pin boots if the
following conditions exist:
• Excessive Corrosion
• Significant Wear
• Visible Damage
Disc Brakes 5-67
63984
221490
221494