GMC chevrolet camaro 2000 Service Manual page 568

)
Brakes
2. Move the brake lever back and forth in order to
push out the tappets (2).
3. Pull out the following components:
• The tappets (2)
• The pin (3)
• The lever (4)
Installation Procedure
1. Push the brake lever into the housing.
2. Apply grease to positions 1, 2, and 3.
Important: Check operation by pinching the tappets
together and moving the brake lever. One or both
tappets must extend. With the tappets pinched
together, the brake lever must feel firmly seated. You
) must not be able to pull outthe lever.
3. Install the pin and the tappets (2 and 3).
)
4. Install the parking brake shoe. Refer to Park
Brake Shoe Replacement.
Park Brake 5-95
64006
64006
64007