Removing And Installing Camshafts And Camshaft Adjuster - Skoda Octavia Workshop Manual

15
------------ 15-16 ------------
Cylinder Head, Valve Gear
K Inlet camshaft
Wear limit for inlet and intake camshaft
♦ Wear limit: max. 0.20 mm
Removing and installing camshafts
and camshaft adjuster
(with cylinder head installed)
Special tools, testers and aids required
♦ Torque wrench
♦ Counterholder MP 1-216
♦ Holder for the chain tensioner 3366
♦ Safety drift e.g. T 40011
♦ Tensioning screw T 10092
♦ Sealant D 454 300 A2
Removing
- Remove v-ribbed belt and tensioning device
⇒ page 13-1
- Remove top part of toothed belt guard.
K - Rotate crankshaft at central bolt of crank-
shaft timing belt sprocket in direction of ro-
tation of engine and position to TDC mark-
ing of cylinder 1 -arrows-.
- Removing cylinder head cover
⇒ page 15-2.
OCTAVIA
Edition 04.03
S00.5104.56.20