Installing The Outer Rails To The Rack - Toshiba IP edge EP Installation Manual

EM SERVER RACK MOUNT
Figure 2-9 Inner Rack Extension
Installing the Outer Rails
to the Rack
Installation Manual August, 2011
1. Place the inner rack extensions on the side of the chassis aligning the
hooks of the chassis with the rail extension holes. Make sure the
extension faces "outward" just like the pre-attached inner rail. Refer to
Figure 2-9.
2. Slide the extension toward the front of the chassis.
3. Secure the chassis with two screws as illustrated.
4. Repeat steps 1-3 for the other inner rail extension.
1. Attach the short bracket to the outside of the long bracket. You must
align the pins with the slides. Also, both bracket ends must face the
same direction. Refer to
2. Adjust both the short and long brackets to the proper distance so that
the rail fits snugly into the rack.
3. Secure the long bracket to the front side of the outer rail with two M5
screws and the short bracket to the rear side of the outer rail with
three M5 screws.
4. Repeat steps 1-4 for the left outer rail.

Installing the Outer Rails to the Rack

Figure 2-10.
2-11