Automated Attendant Pbr Start Time Selection - NEC Electra Elite IPK Programming Manual

Document Revision 4
___________________________________________________________________________________
1-4-09 Automated Attendant PBR Start Time
Selection
General Description
Use this Memory Block to specify whether the Push Button Receiver (PBR) can
receive dual-tone multifrequency (DTMF) signaling while the Automated Attendant is
sending the message or after the message is complete.
Display
D a t a
N o .
0 9 : P B R
T I M E
Settings
LK 1 LK 2
FR AF
Programming Procedures
1 Go off-line.
J I
2 Press LK1 + LK4 +
3 Press the corresponding CO/PBX line key to change the data option.
Setting Data:
FR: While the Automated Attendant sends the message.
AF: After the Automated Attendant sends the message.
G
4 Press to write the data and display the next Memory Block.
5 Program the next Memory Block or press
Related Programming
Refer to individual features in the Electra Elite IPK Features and Specifications Manual.
When FR is assigned, the Automated Attendant message send start time and the PBR connected to Automated
Attendant trunk start time are the same.
___________________________________________________________________________________
2 - 162
S e t t i n g
T i t l e
D a t a
S T R T F R
D I S P L A Y
LK 3 LK 4 LK 5
t o access the Memory Block.
E
to go back on-line.
LK 6 LK 7
Notes
Electra Elite IPK
System Mode
1
Submode
4
Data No.
09
PC Programming
+AU
LK 8 The shaded
selection is the
default.
Memory Blocks