NEC Electra Elite IPK Programming Manual page 292

Electra Elite IPK
___________________________________________________________________________________
Page 5
LK 1 LK 2
Forced
Group
Account Code
Listening
/Authorization
Selection
Code
Page 6
LK 1 LK 2
VMS
ARS Overflow Message
Indication
Page 7
LK 1 LK 2
Send
Caller ID to Not Used
SLT
Programming Procedures
1 Go off-line.
K H
2 Press LK1 + LK8 +
3 Use the dial pad to enter Class No.
Use the following to enter Class No:
K I
~ t o enter numeric data
J
t o move cursor left
L
t o move the cursor right
4 Press the corresponding CO/PBX line key to allow or deny the feature selection.
The LED indication changes to indicate data each time CO/PBX line key is pressed.
CO/PBX
Line Key LED
Data
C
A
Press to go to the next page.
Press to go back to the previous page.
G
5 Press key to transfer data.
6 Repeat Steps 3 and 4 for each Class. The next Memory Block is displayed.
7 Program the next Memory Block or press
Related Programming
M.B. Number Memory Block Name
1-8-07
Class of Service (Attendant) Feature Selection 1
___________________________________________________________________________________
Programming Manual
LK 3 LK 4
Set Call
Station
Forward – Off
Relocation
-Premise
LK 3 LK 4
Unverified for
Forced
Account Code Not Used
/Authorization
Code
LK 3 LK 4
Station Name
Hot Key Pad
Assignment
to access the Memory Block.
Off On
Deny Allow
E
to go back on-line.
LK 5 LK 6
Pre-Set
Live
Dialing
Monitoring
Allow/Deny
LK 5 LK 6
Caller ID for Call Monitor
K-CCIS (Originate)
LK 5 LK 6
Interactive
DNIS Display
Soft Keys
Document Revision 4
LK 7 LK 8
ANI/Caller ID
Display Not Used
Selection
LK 7 LK 8
Saved
Call Monitor Caller ID
(Receive) missed
call Info.
LK 7 LK 8
Not Used Not Used
2 - 215