Automatic Day/Night Mode By Day Of Week Selection - NEC Electra Elite IPK Programming Manual

Electra Elite IPK
___________________________________________________________________________________
1-1-32 Automatic Day/Night Mode by Day of
Week Selection
General Description
Use this Memory Block to select either Pattern 1 or Pattern 2 Day/Night Mode start
time for each day of the week. Memory Block 1-1-27 (Automatic Day/Night Mode
Switching Time Assignment) sets Day/Night Mode start time for Pattern 1 and Pattern
2 to switch the system between Day Mode and Night Mode.
Display
D a t a
N o .
3 2 : D / N
T I M E
Settings
LK 1 LK 2
Sun Mon
Programming Procedures
1 Go off-line.
C B
2 Press LK1 + LK1 +
3 Press the corresponding CO/PBX line key to change the data option.
Each time a CO/PBX line is pressed, the LED indication changes from Pattern 1 to
Pattern 2.
CO/PBX
Line LED
Data
G
4 Press to write the data and display the next Memory Block.
5 Program the next Memory Block or press
___________________________________________________________________________________
Programming Manual
T i t l e
B Y D A Y
D I S P L A Y
LK 3 LK 4
Tue Wed
to access the Memory Block.
Off On
Day/Night Day/Night
Automatic Automatic
Switching Switching
Pattern 1 Pattern 2
E
LK 5 LK 6 LK 7
Thu Fri
The shaded area indicates
the default setting.
to go back on-line.
Document Revision 4
LK 8
Default not
assigned.
Sat
Default Values
Sunday ~ Saturday = Pattern 1
System Mode
1
Submode
1
Data No.
32
PC Programming
+BM
2 - 43