NEC Electra Elite IPK Programming Manual page 497

Document Revision 4
___________________________________________________________________________________
1. Specify Call Appearance as the call appearance number of Call Appearance Block numbers from Memory Block
4-43 (Station to Call Appearance Block Assignment).
2. Use this Memory Block to assign the following functions to each of the CO/PBX line keys on each telephone in a
tenant specified as Tenant Mode in Memory Block 2-05 (Line Key Selection):
H
Not specified (NON)
H
CO/PBX Line (CO) 01~64
H
CFW - BNA
H
CFW - ALL
H
Call Appearance (C) 00~47, 01~24 (Each Call Appearance Block may have a maximum of 24 Call
Appearance keys).
H
Feature Access (FA) 01~16
H
Trunk Group (TKGP) 01~32
H
Route Advance Block (ADV) 01~32
H
Secondary Incoming Extension (SIE) 01~C0
H
Microphone (MIC)
H
Headset (H SET)
H
Scroll Key for ANI/Caller ID (SCROLL)
H
DND On/Off
H
LOG On/Off
H
BGM On/Off
H
Intercom Key (ICM)
___________________________________________________________________________________
2 - 420
Notes
Electra Elite IPK
Memory Blocks