NEC Electra Elite IPK Programming Manual page 375

Document Revision 4
___________________________________________________________________________________
Related Programming
M.B. Number Memory Block Name
1-11-06 Signaling Selection
7-1 Card Interface Slot Assignment
1. A DTI-U( ) ETU must be assigned in the system to set this Memory Block.
2. When the default setting is changed to E&M or DID, the affected trunks are automatically reassigned to Trunk
Group 00. When trunks 01 ~ 08 are affected, default line key assignment for all Multiline Terminals changes to
Not Used and must also be reassigned. Memory Block 3-14 resets to second dial.
___________________________________________________________________________________
2 - 298
Notes
Electra Elite IPK
Memory Blocks