NEC Electra Elite IPK Programming Manual page 202

Electra Elite IPK
___________________________________________________________________________________
Display (R3000 or higher)
D a t a
N o .
2 3 : P R K R C L
T I M E
Programming Procedures
1 Go off-line.
B C
2 Press LK1 + LK2 +
3 Use the dial pad to enter the Data Setting for Class 1.
Setting Data
G
001s~999s (e.g., 120s = 2 Minutes)
4 Press to write the data and display the next Timer Class of Service.
5 Program the next Timer Class of Service or press
Related Programming
M.B. Number Memory Block Name
4-71 Station to Timer Class of Service
1. Telephone Ports 1 and 2 are in Station to Timer Class of Service, Class 1, by default. All other ports are in
Station to Timer Class of Service, Class 2, by default.
2. When a system is upgraded from R2500 or lower to R3000 or higher, the System Call Park Recall Time
Selection is reset to the default during the upgrade process.
___________________________________________________________________________________
Programming Manual
T i m e r
C l a s s
S e t t i n g
1 ~ 4
T i t l e
D a t a
1 = 0 6 0 s
D I S P L A Y
to access the Memory Block.
E
to go back on-line.
Notes
Document Revision 4
Default Values
Class 1~4 = 060s
2 - 125