NEC Electra Elite IPK Programming Manual page 55

Document Revision 4
___________________________________________________________________________________
LK 1 System Mode
LK 5 SMDR/LCR
Data
Memory Block Name
No.
02 SMDR Print Format
13 Printer Connected Selection
14 Printer Line Feed Control Selection
25 SMDR Valid Call Time Assignment
26 SMDR Incoming/Outgoing Print
Selection
LK 1 System Mode
LK 6 DSS
Data
Memory Block Name
No.
01 Attendant Add-On Console to
Telephone Port Assignment
03 DSS Call Voice/Tone Signal
Selection
05 Attendant Add-On Console Key
Selection
07 Message Board Lamp Assignment
08 Attendant Transfer Selection During
Live Record
___________________________________________________________________________________
1 - 22
Default Value
ALL
NO
YS
040s
OUT
Default Value
Refer to 1-6-01 Attendant Add-On Console to Telephone Port
Assignment on page 2-183.
VOICE
Refer to 1-6-05 Attendant Add-On Console Key Selection on
page 2-185.
NON
YS
Electra Elite IPK
Programming Values
ALL, MSK
NO, PC(Future), YS
YS, NO
000~990s (in 10-second increments)
ALL, OUT, INC
Programming Values
TONE, VOICE
NON (Not assigned)
MSG (message)
NO, YS
Multiline Terminal Programming