System Data List - NEC Electra Elite IPK Programming Manual

Electra Elite IPK
___________________________________________________________________________________
S 3 S
ECTION YSTEM
The System Data List is a complete list of Memory Blocks that are available in the
Electra Elite IPK system. The information is organized by mode, submode, and then
numerically by Memory Block number. The Memory Block number and name, the
default values, and programming values are provided for each Memory Block.
LK 1 System Mode
LK 1 CO Line
Data
Memory Block Name
No.
00 Pause Time Selection
01 DP Interdigit Time Selection
02 Hookflash Time Selection
03 Hold Recall Time Selection
(Non-Exclusive Hold)
04 Automatic Redial Time Selection
05 Start Time Selection
06 CO/PBX Incoming Ringing Alarm
Time Selection
07 Tie Line Delay Ringing Time
Selection
09 Manual Pause Selection
11 System Transfer/Camp-On
Selection
___________________________________________________________________________________
Programming Manual
D L
ATA IST
Default Value
3.0s
B
600ms
25s (R2500 or lower)
60s (R3000 or
higher)
Table 1: 030
Table 2: 060
Table 3: 002
10s (R2500 or lower)
02s (R3000 or
higher)
∞ (No Limit) (R2500
or lower)
000s (R3000 or
higher)
∞ (No Limit) (R2500
or lower)
000s (R3000 or
higher)
NO
YS
Document Revision 4
Programming Values
1.0s, 3.0s
Pattern A or B
20ms, 40ms, 60ms, 80ms, 100ms,
140ms,
160ms, 200ms, 400ms, 600ms,
800ms,
1.0s, 1.5s, 2.0s, 3.0s, 5.0s
25s, 45s, 60s, 90s, 120s, 180s, 240s,
∞ (No Limit)(R2500 or lower)
000s (No Limit), 001s~255s (R3000 or
higher)
Table 1: 001 ~ 050 sec.
Table 2: 001 ~ 100 sec.
Table 3: 001 ~ 015 times
2s, 10s, 20s, 30s, 40s, 50s, 60s, 70s
(R2500 or lower)
00s (No Limit), 01s~99s (R3000 or
higher)
10s, 20s, 30s, ∞ (R2500 or lower)
000s (No Limit), 001s~255s (R3000 or
higher)
10s, 20s, 30s, ∞ (R2500 or lower)
000s (No Limit), 001s~255s (R3000 or
higher)
NO, YS
NO, YS
1 - 13