NEC Electra Elite IPK Programming Manual page 437

Document Revision 4
___________________________________________________________________________________
1-15-13 Centralized Day/Night Switching for
Remote Office Assignment
General Description
Use this Memory Block to assign the Electra Elite IPK to switch Day/Night mode when
it receives the command from a main office.
Display
D a t a
N o .
1 3 : C E N
T I M E
Settings
LK 1 LK 2
Deny Allow
(NO) (YS)
Programming Procedures
1 Go off-line.
A C
2 Press LK1 + LK15 +
3 Press the corresponding CO/PBX line key to change the Setting Data option.
G
4 Press to write the data, and display the next Memory Block.
5 Program the next Memory Block or press
Related Programming
M.B. Number Memory Block Name
7-1 Card Interface Slot Assignment
7-3-01 MIF (LCR) Assignment
7-3-02 MIF (SMDR) Assignment
1-15-00 K-CCIS Main/Remote Office Selection
1-15-01 Common Signal Channel Data Speed Assignment
1-15-02 Common Signal Channel Assignment
1-15-03 Originating Point Code Assignment
1-15-04 Destination Point Code Assignment
1-15-05 Destination Point Code Transfer Assignment
1-15-06 Originating Office Code Number Assignment
___________________________________________________________________________________
2 - 360
S e t t i n g
T i t l e
D a t a
D / N N O
D I S P L A Y
LK 3 LK 4 LK 5
to access the Memory Block.
E
to go back on-line.
LK 6 LK 7 LK 8
Electra Elite IPK
System Mode
1
Submode
15
Data No.
13
PC Programming
+AW
The shaded
selection is the
default.
Memory Blocks