Code Restriction Class (Without Authorization Code) - NEC Electra Elite IPK Programming Manual

Document Revision 4
___________________________________________________________________________________
4-64 Code Restriction Class (without
Authorization Code) Day Mode
Assignment
General Description
Use this Memory Block to specify the Code Restriction Class per station in Day Mode
when Forced Account Code/Authorization Code is set in Memory Block 1-8-08 [Class
of Service (Station) Feature Selection 2] and a call is made without using a Forced
Account Code/Authorization Code.
Display
T e l P o r t
D a t a
N o .
N o .
( 0 1 ~ C O )
0 1 / 6 4 : C L S
T I M E
Programming Procedures
1 Go off-line.
F D
2 Press LK4 +
3 Use the dial pad to change Day Mode Restriction Class for Tel port No.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K I
t
~ o enter numeric data or Tel Port No.
D
– OR –
B
to go to next assigned Tel Port No.
B
A
+
B
B
+
C
G
+
4 Press to write the data and display the next Memory Block.
5 Program the next Memory Block or press
___________________________________________________________________________________
2 - 582
S e t t i n g
T i t l e
D a t a
D A Y = 1 5
D I S P L A Y
to access the Memory Block.
t o enter A for Port Numbers 100~109
t o enter B for Port Numbers 110~11
t o enter C for Port Number 120
E
to go back on-line.
Electra Elite IPK
CO/PBX Line Mode
Submode
PC Programming
Default Value
All Stations Class 15
Memory Blocks
4
—
Data No.
64
+AC