NEC Electra Elite IPK Programming Manual page 65

Document Revision 4
___________________________________________________________________________________
LK 1 System Mode
LK 15 K-CCIS (Continued)
Data
Memory Block Name
No.
16 Centralized BLF Send Extension
Number Assignment
17 Centralized BLF Send Time
Assignment
18 Centralized BLF Receive Extension
Number Assignment
19 Centralized 911 Allow/Deny
Selection
20 Centralized 911 Originating Number
Selection
21 Centralized 911 Look Ahead
Routing Allow/Deny Selection
LK 1 System Mode
LK 16 HUB
Data
Memory Block Name
No.
00 Auto Negotiation Yes/No Selection
01 Port Speed Selection – 10/100
Base-T
02 Port Duplex Mode Selection
03 MDI/MDIX Mode Selection
04 VLAN Mode Selection
05 Default VLAN ID Assignment
06 Port Based Priority Selection
07 High Priority RX Tag Assignment
___________________________________________________________________________________
1 - 32
Default Value
All Tables Not
Specified
04s
All Tables Not
Specified
NO (Deny)
STA. (Station No.)
NO (Deny)
Default Value
YS (Enable)
100 (100 Base-TX)
HALF
AUTO
NO (Disable)
0001 (0x001 Hex)
NO (Not Assigned)
7
Electra Elite IPK
Programming Values
Table Range: 001~120
3-digit Extension numbers 100~899
4-digit Extension numbers
1000~8999
04s, 08s, 12s, 16s
Table Range: 001~120
3-digit Extension numbers 100~899
4-digit Extension numbers
1000~8999
NO (Deny), YS (Allow)
STA. (Station No.), CESID (CES-ID)
NO (Deny), YS (Allow)
Programming Values
YS, NO
10 (10 Base-T), 100 (100 Base-TX)
HALF, FULL
MDIX, MDI, AUTO
NO, YS (Enable)
0001~4095 (0x001~0xfff Hex)
NO, LO (Low), HI (High)
(Lowest) 0~7 (Highest)
Multiline Terminal Programming