Connecting Components
SCSI ID
The ID of the installed SCSI device must be different from the IDs of other devices. Refer
to the device manuals for more information.
Termination
The cable shipped from Toshiba is terminated, so there is no need to terminate the
device.
Installing SCSI devices
You can install up to three 5.25-inch internal SCSI devices in the 5.25-inch device bays.
1
Remove the front and side panels. For instructions, see
server panels
2
Set the SCSI-ID of the SCSI device.
3
Position the rails on the SCSI device and secure them with four screws. Use "Screw
B" designated in the table
Installing the rails for a SCSI device
4
Remove the screws securing the 5.25-inch shield cover and store the cover for
possible reuse.
Removing the shield
on page 33.
Toshiba supplied hardware items
Adding SCSI I/O devices
Removing and replacing the
on page 32.
56