Toshiba Magnia 550D User Manual page 98

Hardware Diagnostics
09. SCSI TEST checks the SCSI devices.
Before running the test, you must set the parameters.
CHAN
HOST
ID00, 01, 02 ...
NOTE: If "HOST ID NUMBER" is set as "ALL" then "SCSI ID NUMBER" and
"CHANNEL NUMBER" are ignored.
- 01. INQUIRY subtest issues the INQUIRY command to the SCSI bus and displays
result messages returned from the devices on the SCSI bus. After specifying the
valid host and channel number, the INQUIRY command is sent to the target SCSI
bus. It then displays the result code from ID0 through ID15.
The types of SCSI devices to be displayed are as follows:
Type
HDD
CMT
PRT
PRC
WON
???
The following screen provides an example of when the built-in CD-ROM drive is
connected to a SCSI controller and the built-in hard disk drives are connected to the
MegaRAID Adapter.
Parameter
15
Name
Hard Disk Drive
Magnetic Tape Device
Printer
Processor (SAF-TE)
Write Once Device
Undefined Device - Not
connected
Indicates the ASPI angle ID and host adapter
Indicates the channel number in the target host
adapter
Indicates the SCSI ID number in the target host
adapter.
Type
CD
SCN
MO
MC
COM
Hardware Diagnostics Program
Meaning
Name
CD-ROM Device
Scanner
Magnet-optic Disk Device
Media Changer
Communication Device
98