Connecting Components
5
Remove the front door panel by releasing the two hooks located on the upper part of
the server.
Removing the front door panel
NOTE: When releasing the plastic hooks, be careful not to break them.
Replacing the front door panel
To replace the front door panel, proceed as follows:
1
Attach the front door panel by fitting the hooks located at the upper and middle parts
of the door panel in to the mounting holes on the server.
Attaching the front door panel
NOTE: Insert the hooks while pushing up on the front bezel, being careful not to
break them.
2
To attach the lower part of the door, fit the latch at the lower part of the door panel in
to the corresponding hole in the server
3
Plug the power cable in to an AC outlet.
Removing and replacing the server panels
34