Toshiba Magnia 550D User Manual page 88

Hardware Diagnostics
NOTE: To check the error log, select 03.LOG UTILITIES from the Hardware
Diagnostics Program Main Menu. For more details on the error log display, refer to
Key Operations for Log Utilities
stopped, the test result is not displayed.
02. Test ITEM EDIT
Select this option to see the items currently in the RUNNING TEST and to add or
delete individual tests. See section
details on item selection.
03. Finish BUZZER Sound
Select this option so that when the Server finishes the running test, the beep
sounds.
99. Exit to DIAGNOSTIC MENU
Select this option to return to the Hardware Diagnostics Main Menu.
3 From the default list of tests; leave, add <ins>, or delete <del> tests. See
Test Items and Error Log Information
4 Press Enter.
When a test is selected, the TEST PARAMETER Screen displays:
[ TEST PARAMETER ]
01. Go to Test
02. Test ITEM EDIT
03. Finish BUZZER Sound
04. Exit to DIAGNOSTIC MENU
TEST ITEM EDIT Parameters
NOTE: You must clear the Event Log in the Log Utilities before you start 02.
Running Test. Refer to
the Log Utilities, the test will fail.
Select this option to see the items currently in RUNNING TEST and to add or delete
individual tests.
1 Highlight, using the arrow keys, 02. Test ITEM EDIT
on page 101. If the test in progress has been
TEST ITEM EDIT Parameters
on page 91.
: OFF
Log Utilities on page 100. If you do not clear the Event Log in
Hardware Diagnostics Program
on page 88 for
Details of
88