Toshiba Magnia 550D User Manual page 99

Hardware Diagnostics
10. CD-ROM TEST checks the computer's CD-ROM functions
Insert the Magnia 550D Software and Documentation CD-ROM for this test.
- 01. Sequential Address Read subtest is a sequential reading of one block unit of all
the logical addresses.
- 02. Random Address Read subtest reads data at random addresses.
For the error log information, refer to Log Utilities for the SCSI HDD TEST.
11. SAF-TE TEST checks the SAF-TE function and the status LED of the hard disk
drives.
- 01. SAF-TE test detects the SAF-TE controller and checks the operation by flashing
the LED for each hard disk drive.
The test detects the SAF-TE controller first and shows the connecting destination of
the detected SAF-TE controller (host number, SCSI ID, and channel number) with
model name. For example:
--HT-ID----CH--VENDOR-PRODUCT-------FAN-PS--SLOT
XX XX XX XXXXX
After detecting the SAF-TE controller, the following message displays:
SAF-TE LED Steady ON (Faulty Flag)
Check that all LEDs of the hard disk drives are lit orange. Then press Enter.
The following message displays:
SAF-TE LED Blinking (Rebuilding Flag)
Check that all LEDs for the hard disk drives are flashing orange. Then press Enter.
The following message displays:
SAF-TE LED Steady ON (Rebuild Interrupted) Hit any key
Check that all LEDs for the hard disk drives are lit orange. Then press Enter.
The following message displays:
SAF-TE LED Blinking (Rebuilding Flag)
Check that all LEDs of the hard disk drives are flashing orange. Then press Enter.
The following message displays:
SAF-TE LED Reset (No Error Flag)
Check that all LEDs of the hard disk drives are off. Then press Enter.
XXXX XX XX XX
Hardware Diagnostics Program
Hit any key
Hit any key
Hit any key
Hit any key
99