Toshiba Magnia 550D User Manual page 32

Connecting Components
Toshiba supplied hardware items
The following table lists the hardware items that Toshiba provides with your server.
Type
Screw A (SAE)
Screw B (metric)
Screw C (SAE)
Stud
Rails
When performing server maintenance:
Use the appropriate type and size of screwdriver. A screwdriver that is too small or
too large can damage the screw head. Check the screw type before use.
Be careful not to lose any removed screws or drop them inside the equipment.
Use the same type of screws when installing devices.
Installing HDDs on the drive carrier
Installing SCSI HDDs and adapter plate in the 5.25-
inch device bay Installing expansion cards
Installing units except HDDs (MO or DAT) on the
drive carrier or the rails
Installing HDDs or SCSI devices in the 5.25-inch
device bay
Installing the drive carrier on the server
When installing devices, use the accessories that
came with the devices. Use this screw to replace
missing screws.
Reserved parts. Usually, they are not used.
Used for installing HDDs or SCSI devices in the 5.25-
inch device bay
Installing optional devices
Usage
32