Table of Contents
Advertisement
Connecting Components
6
Remove the thermal grease protection cover from the heat sink, and attach the clip
without the latch to the left side of the CPU socket.
An indentation on the bottom of the heat sink functions as a guide in placing the heat
sink onto the CPU.
7
While preventing the heat sink from sliding around on top of the CPU, attach the clip
with the latch to the right side of the CPU socket.
Installing the heat sink
NOTE: Toshiba does not recommend reusing heat sinks.
8
Connect the fan cable attached to the secondary CPU module to the CPU2 fan
connector (J15) on the system board.
Adding a secondary CPU module
39
Advertisement
Table of Contents
Troubleshooting
