Chapter 5: Server Setup Tool; Starting Sst - Toshiba Magnia 550D User Manual

Chapter 5
Server Setup Tool
Before starting the Server Setup Tool (SST), make sure you have:
The SST CD-ROM
A blank formatted diskette

Starting SST

NOTE: The SST may not work correctly with certain optional hardware devices (for
example, a SCSI card). If the SST does not work properly, remove the optionally
installed hardware device(s).
When the SST is running, do not turn off or reset the server, or remove the Startup
Disk or SST CD-ROM.
The SST cannot be used to install the operating system when hard disk drives are
connected to two or more disk controllers. To install the operating system using the
SST, one or more hard disk drives must be connected to one controller.
1 Make certain that the monitor, keyboard, mouse, and all peripherals are correctly
connected.
2 Turn on the front power switch.
MAGNIA 550D Front View
Power button
103