Table of Contents
Advertisement
System Configuration Setup
AC Back Function
Memory
Soft-Off
(default)
Full-On
Modem Use IRQ - Specifies an interruption (IRQ3 ~ IRQ7) for a AC97 CODEC-
controlled modem. Specify IRQ4.
Modem Ring On/Wake on LAN
support Wake on LAN.)
Disable
(default)
PME Event Wake Up - Determines if the server will wake up if a PME even occurs.
Enabled
(default)
Disabled
RTC Alarm Power On - Specifies the date and time when the server is automatically
started.
Enabled
(default)
Disabled
Restarts the system based on the previous
setting (Soft Off or Full On)
Restarts the system when the power button is
pressed
Restarts the system when the power is turned
on.
®
(At the time of this publication, this system does not
Disables this function
Enables the PME Event Wake Up function
Disables the PME Event Wake Up function
Enables this function. If enabled, specify a
date and time.
Disables this function
76
Setup
Advertisement
Table of Contents
Troubleshooting
